FAS: Eavesdropping On the Electromagnetic Emanations of Digital Equipment: The Laws of Canada, England and the United StatesThis document is a rough draft. The Legal Sections are overviews. They will be significantly expanded in the next version.
We in this country, in this generation, are -- by destiny rather than choice -- the watchmen on the walls of world freedom. -President John F. Kennedy
In the novel 1984, George Orwell foretold a future where individuals had no expectation of privacy because the state monopolized the technology of spying. The government watched the actions of its subjects from birth to death. No one could protect himself because surveillance and counter- surveillance technology was controlled by the government. This note explores the legal status of a surveillance technology ruefully known as TEMPEST. Using TEMPEST technology the information in any digital device may be intercepted and reconstructed into useful intelligence without the operative ever having to come near his target. The technology is especially useful in the interception of information stored in digital computers or displayed on computer terminals. The use of TEMPEST is not illegal under the laws of the United States, or England. Canada has specific laws criminalizing TEMPEST eavesdropping but the laws do more to hinder surveillance countermeasures than to prevent TEMPEST surveillance. In the United States it is illegal for an individual to take effective counter-measures against TEMPEST surveillance. This leads to the conundrum that it is legal for individuals and the government to invade the privacy of others but illegal for individuals to take steps to protect their privacy. The author would like to suggest that the solution to this conundrum is straightforward. Information on protecting privacy under TEMPEST should be made freely available; TEMPEST Certified equipment should be legally available; and organizations possessing private information should be required by law to protect that information through good computer security practices and the use of TEMPEST Certified equipment.
I. INTELLIGENCE GATHERING
ELINT is not limited to governments. It is routinely used by individuals for their own purposes. Almost all forms of ELINT are available to the individual with either the technological expertise or the money to hire someone with the expertise. Governments have attempted to criminalize all use of ELINT by their subjects--to protect the privacy of both the government and the population.
II. UNITED STATES LAW
III. ENGLISH LAW
IV. CANADIAN LAW
FTEMPEST-shielding --------- Preventing Electromagnetic Eavesdropping
Very useful for the lay person are: Radio Frequency Interference: How to Find It and Fix It. Ed Hare, KA1CV and Robert Schetgen, KU7G, editors The American Radio Relay League, Newington , CT ISBN 0-87259-375-4 (c) 1991, second printing 1992 Federal Communications Commission Interference Handbook (1991) FCC Consumers Assistance Branch Gettysburg, PA 17326 717-337-1212 and MIL-STD-188-124B in preparation (includes information on military shielding of tactical communications systems) Superintendent of Documents US Government Printing Office Washington, DC 20402 202-783-3238 Information on shielding a particular piece of consumer electronic equipment may be available from the: Electronic Industries Association (EIA) 2001 Pennsylvania Ave NW Washington, DC 20006 Preventing unintended electromagnetic emissions is a relative term. It is not feasible to reduce to zero all unintended emissions. My personal goal, for example, might be to reduce the amount and quality of spurious emission until the monitoring van a kilometer away would have to be in my front yard before it could effectively eavesdrop on my computer. Apartment dwellers with unknown neighbors only inches away (through a wall) might want to even more carefully adopt as many of the following suggestions as possible since signal available for detection decreases as approximately the inverse square of the distance from the monitoring equipment to your computer. II Start with computer equipment that meets modern standards for emission. In the United States, the "quietest" standard for computers and peripherals is known as the "class B" level. (Class A level is a less stringent standard for computers to be use in a business environment.). You want to verify that all computers and peripherals you use meet the class B standard which permits only one-tenth the power of spurious emissions than the class A standard. If you already own computer equipment with an FCC ID, you can find out which standard applies. Contact the FCC Consumers Assistance Branch at 1-717-337-1212 for details in accessing their database. Once you own good equipment, follow the manufacturer's recommendations for preserving the shielding integrity of the system. Don't operated the system with the cover off and keep "slot covers" in the back of the computer in place. III Use only shielded cable for all system interconnections. A shielded cable surrounds the core of control wires with a metal braid or foil to keep signals confined to that core. In the late seventies it was common to use unshielded cable such as "ribbon" cable to connect the computer with, say, a diskette drive. Unshielded cable acts just like an antenna for signals generated by your computer and peripherals. Most computer manufacturer supply shielded cable for use with their computers in order to meet FCC standards. Cables bought from third-parties are an unknown and should be avoided (unless you are willing to take one apart to see for yourself!) Try to avoid a "rat's nest" of wire and cabling behind your equipment and by keeping all cables as short as possible. You want to reduced the length of unintended antennas and to more easily predict the likely paths of electric and magnetic coupling from cable to cable so that it can be more effectively filtered. IV Block radiation from the power cord(s) into the house wiring. Most computers have an EMI filter built into their body where the AC line cord enters the power supply. This filter is generally insufficient to prevent substantial re-radiation of EMI voltages back into the power wiring of your house and neighborhood. To reduce the power retransmitted down the AC power cords of your equipment, plug them in to special EMI filters that are in turn plugged into the wall socket. I use a model 475-3 overvoltage and EMI filter manufactured by Industrial Communication Engineers, Ltd. P.O. Box 18495 Indianapolis, IN 46218-0495 1-800-ICE-COMM ask for their package of free information sheets (AC and other filters mentioned in this note are available from a wide variety of sources including, for example, Radio Shack. I am enthusiastic about ICE because of the "over-designed" quality of their equipment. Standard disclaimers apply.) This particular filter from ICE is specified to reduce retransmission of EMI by a factor of at least 1000 in its high-frequency design range. Although ideally every computer component using an AC line cord ought to be filtered, it is especially important for the monitor and computer CPU to be filtered in this manner as the most useful information available to opponents is believed to come from these sources. V Block retransmitted information from entering your fax/modem or telephone line. Telephone line is generally very poorly shielded. EMI from your computer can be retransmitted directly into the phone line through your modem or can be unintentionally picked up by the magnetic portion of the EMI spectrum through magnetic induction from power supplies or the yoke of your cathode ray tube "CRT" monitor. To prevent direct retransmission, EMI filters are specifically designed for modular telephone jacks to mount at the telephone or modem, and for mounting directly at the service entrance to the house. Sources of well-designed telephone-line filter products include ICE (address above) and K-COM Box 82 Randolph, OH 44265 216-325-2110 Your phone company or telephone manufacturer may be able to supply you with free modular filters, although the design frequencies of these filters may not be high enough to be effective through much of the EMI spectrum of interest. Keep telephone lines away from power supplies of computers or peripherals and the rear of CRTs: the magnetic field often associated with those device can inductively transfer to unshielded lines just as if the telephone line were directly electrically connected to them. Since this kind of coupling decreases rapidly with distance, this kind of magnetic induction can be virtually eliminated by keeping as much distance (several feet or more) as possible between the power supply/monitor yoke and cabling. VI Use ferrite toroids and split beads to prevent EMI from escaping on the surface of your cables. Ferrites are magnetic materials that, for certain ranges of EMI frequencies, attenuate the EMI by causing it to spend itself in heat in the material rather than continuing down the cable. They can be applied without cutting the cable by snapping together a "split bead" form over a thick cable such as a power cord or by threading thinner cable such as telephone several times around the donut-shaped ferrite form. Every cable leaving your monitor, computer, mouse, keyboard, and other computer peripherals should have at least one ferrite core attentuator. Don't forget the telephone lines from your fax, modem, telephone or the unshielded DC power cord to your modem. Ferrites are applied as close to the EMI emitting device as possible so as to afford the least amount of cable that can act as an antenna for the EMI. Good sources for ferrite split beads and toroids include Amidon Associates, Inc. P.O. Box 956 Torrance, CA 90508 310-763-5770 (ask for their free information sheet) Palomar Engineers P.O. Box 462222 Escondido, CA 92046 619-747-3343 (ask for their free RFI information sheet) and Radio Shack. VII Other practical remedies. Other remedies that are somewhat more difficult to correctly apply include providing a good EMI "ground" shield for your computer equipment and other more intrusive filters such as bypass capacitor filters. You probably ought not to think about adding bypass capacitors unless you are familiar with electronic circuits and digital design. While quite effective, added improperly to the motherboard or cabling of a computer they can "smooth out" the square wave digital waveform -- perhaps to the extent that signals are interpreted erroneously causing mysterious "crashes" of your system. In other cases, bypass capacitors can cause unwanted parasitic oscillation on the transistorized output drivers of certain circuits which could damage or destroy those circuits in the computer or peripherals. Also, unlike ferrite toroids, adding capacitors requires actually physically splicing them in or soldering them into circuits. This opens up the possibility of electric shock, damage to other electronic components or voiding the warranty on the computer equipment. A good EMI ground is difficult to achieve. Unlike an electrical safety ground, such as the third wire in a three-wire AC power system, the EMI ground must operate effectively over a much wider part of the EMI spectrum. This effectiveness is related to a quality known as electrical impedance. You desire to reduce the impedance to as low a value as possible over the entire range of EMI frequencies. Unlike the AC safety ground, important factors in achieving low impedance include having as short a lead from the equipment to a good EMI earth ground as possible (must be just a few feet); the gauge of the connecting lead (the best EMI ground lead is not wire but woven grounding "strap" or wide copper flashing sheets; and the physical coupling of the EMI into the actual earth ground. An 8 ft. copper-plated ground may be fine for AC safety ground, but may present appreciable impedance resistance to an EMI voltage. Much better would be to connect a network of six to eight copper pipes arranged in a six-foot diameter circle driven in a foot or two into the ground, electrically bonded together with heavy ground strap and connected to the equipment to be grounded via a short (at most, several feet), heavy (at least 3/4-1" wide) ground strap. If you can achieve a good EMI ground, then further shielding possibilities open up for you such as surrounding your monitor and computer equipment in a wire-screen Faraday cage. You want to use mesh rather than solid sheet because you must preserve the free flow of cooling air to your equipment. Buy aluminum (not nylon) screen netting at your local hardware store. This netting typically comes in rolls 36" wide by several feet long. Completely surround your equipment you want to reduce the EMI being careful to make good electrical bonds between the different panels of netting and your good earth ground. I use stainless steel nuts, bolts, and lock washers along with special non-oxidizing electrical paste (available from Electrical contractors supply houses or from ICE) to secure my ground strapping to my net "cages". A good Faraday cage will add several orders of magnitude of EMI attenuation to your system. VIII Checking the effectiveness of your work. It is easy to get a general feeling about the effectiveness of your EMI shielding work with an ordinary portable AM radio. Bring it very close to the body of your computer and its cables in turn. Ideally, you should not hear an increased level of static. If you do hear relatively more at one cable than at another, apply more ferrite split beads or obtain better shielded cable for this component. The practice of determining what kind of operating system code is executing by listening to a nearby AM radio is definitely obsolete for an well-shielded EMI-proof system! To get an idea of the power and scope of your magnetic field emissions, an ordinary compass is quite sensitive in detecting fields. Bring a compass within a few inches of the back of your monitor and see whether it is deflected. Notice that the amount of deflection decreases rapidly with distance. You want to keep cables away from magnetic sources about as far as required not to see an appreciable deflection on the compass. VIIII Summary If you start with good, shielded equipment that has passed the FCC level B emission standard then you are off to a great start. You may even be able to do even better with stock OEM equipment by specifying "low-emission" monitors that have recently come on the market in response to consumer fears of extremely low frequency ("ELF") and other electromagnetic radiation. Consistently use shielded cables, apply filtering and ferrite toroids to all cabling entering or leaving your computer equipment. Finally, consider a good EMI ground and Faraday cages. Beyond this there are even more effective means of confining the electrical and magnetic components of your system through the use of copper foil adhesive tapes, conductive paint sprays, "mu metal" and other less common components.
1. Undelivered speech of President John F. Kennedy, Dallas Citizens Council (Nov. 22, 1963) 35-36.
2. TEMPEST is an acronym for Transient Electromagnetic Pulse Emanation Standard. This standard sets forth the official views of the United States on the amount of electromagnetic radiation that a device may emit without compromising the information it is processing. TEMPEST is a defensive standard; a device which conforms to this standard is referred to as TEMPEST Certified. The United States government has refused to declassify the acronym for devices used to intercept the electromagnetic information of non-TEMPEST Certified devices. For this note, these devices and the technology behind them will also be referred to as TEMPEST; in which case, TEMPEST stands for Transient Electromagnetic Pulse Surveillance Technology. The United States government refuses to release details regarding TEMPEST and continues an organized effort to censor the dissemination of information about it. For example the NSA succeeded in shutting down a Wang Laboratories presentation on TEMPEST Certified equipment by classifying the contents of the speech and threatening to prosecute the speaker with revealing classified information. [cite coming].
3. This Note will not discuses how TEMPEST relates to the Warrant Requirement under the United States Constitution. Nor will it discuss the Constitutional exclusion of foreign nationals from the Warrant Requirement.
4. HUMINT has been used by the United States since the Revolution. "The necessity of procuring good intelligence is apparent & need not be further urged -- All that remains for me to add is, that you keep the whole matter as secret as possible. For upon Secrecy, Success depends in Most Enterprises of the kind, and for want of it, they are generally defeated, however well planned & promising a favorable issue." Letter of George Washington (Jul. 26, 1777).
5. "... I wish you to take every possible pains in your powers, by sending trusty persons to Staten Island in whom you can confide, to obtain Intelligence of the Enemy's situation & numbers -- what kind of Troops they are, and what Guards they have -- their strength & where posted." Id.
6. Eavesdrip is an Anglo-Saxon word, and refers to the wide overhanging eaves used to prevent rain from falling close to a house's foundation. The eavesdrip provided "a sheltered place where one could hide to listen clandestinely to conversation within the house." W. MORRIS & M. MORRIS, MORRIS DICTIONARY OF WORD AND PHRASE ORIGINS, 198 (1977).
7. Pursglove, How Russian Spy Radios Work, RADIO ELECTRONICS, 89-91 (Jan 1962).
8. Interception is an espionage term of art and should be differentiated from its more common usage. When information is intercepted, the interceptor as well as the intended recipient receive the information. Interception when not used as a term of art refers to one person receiving something intended for someone else; the intended recipient never receives what he was intended to receive.
9. There are two types of emissions, conducted and radiated. Radiated emissions are formed when components or cables act as antennas for transmit the EMR; when radiation is conducted along cables or other connections but not radiated it is referred to as "conducted". Sources include cables, the ground loop, printed circuit boards, internal wires, the power supply to power line coupling, the cable to cable coupling, switching transistors, and high-power amplifiers. WHITE & M. MARDIGUIAN, EMI CONTROL METHODOLOGY AND PROCEDURES,
10.1 (1985). "[C]ables may act as an antenna to transmit the signals directly or even both receive the signals and re-emit them further away from the source equipment. It is possible that cables acting as an antenna in such a manner could transmit the signals much more efficiently than the equipment itself...A similar effect may occur with metal pipes such as those for domestic water supplies. ... If an earthing [(grounding)] system is not installed correctly such that there is a path in the circuit with a very high resistance (for example where paint prevents conduction and is acting as an insulator), then the whole earthing system could well act in a similar fashion to an antenna. ... [For a VDU] the strongest signals, or harmonics thereof, are usually between 60-250 MHz approximately. There have however been noticeable exception of extremely strong emissions in the television bands and at higher frequencies between 450-800 MHz. Potts, Emission Security, 3 COMPUTER LAW AND SECURITY REPORT 27 (1988). 10. The TEMPEST ELINT operator can distinguish between different VDUs in the same room because of the different EMR characteristics of both homo and heterogeneous units. "[T]here is little comparison between EMR characteristics from otherwise comparable equipment. Only if the [VDU] was made with exactly the same components is there any similarity. If some of the components have come from a different batch, have been updated in some way, and especially if they are from a different manufacturer, then completely different results are obtained. In this way a different mark or version of the same [VDU] will emit different signals. Additionally because of the variation of manufacturing standards between counties, two [VDUs] made by the same company but sourced from different counties will have entirely different EMR signal characteristics...From this it way be thought that there is such a jumble of emissions around, that it would not be possible to isolate those from any one particular source. Again, this is not the case. Most received signals have a different line synchronization, due to design, reflection, interference or variation of component tolerances. So that if for instance there are three different signals on the same frequency ... by fine tuning of the RF receiver, antenna manipulation and modification of line synchronization, it is possible to lock onto each of the three signals separately and so read the screen information. By similar techniques, it is entirely possible to discriminate between individual items of equipment in the same room." Potts, supra note
9. For a discussion of the TEMPEST ELINT threat See e.g., Memory Bank, AMERICAN BANKER 20 (Apr 1 1985); Emissions from Bank Computer Systems Make Eavesdropping Easy, Expert Says, AMERICAN BANKER 1 (Mar 26 1985); CRT spying: a threat to corporate security, PC WEEK (Mar 10 1987).
11. TEMPEST is concerned with the transient electromagnetic pulses formed by digital equipment. All electronic equipment radiates EMR which may be reconstructed. Digital equipment processes information as 1's and 0's--on's or off's. Because of this, digital equipment gives off pulses of EMR. These pulses are easier to reconstruct at a distance than the non-pulse EMR given off by analog equipment. For a thorough discussion the radiation problems of broadband digital information see e.g. military standard MIL-STD-461 REO2; White supra note 9, 10.2.
12. See supra note 2.
13. Of special interest to ELINT collectors are EMR from computers, communications centers and avionics. Schultz, Defeating Ivan with TEMPEST, DEFENSE ELECTRONICS 64 (June 1983).
14. The picture on a CRT screen is built up of picture elements (pixels) organized in lines across the screen. The pixels are made of material that fluoresces when struck with energy. The energy is produced by a beam of electrons fired from an electron gun in the back of the picture tube. The electron beam scans the screen of the CRT in a regular repetitive manner. When the voltage of the beam is high then the pixel it is focused upon emits photons and appears as a dot on the screen. By selectively firing the gun as it scans across the face of the CRT, the pixels form characters on the CRT screen. The pixels glow for only a very short time and must be routinely struck by the electron beam to stay lit. To maintain the light output of all the pixels that are supposed to be lit, the electron beam traverses the entire CRT screen sixty times a second. Every time the beam fires it causes a high voltage EMR emission. This EMR can be used to reconstruct the contents of the target CRT screen. TEMPEST ELINT equipment designed to reconstruct the information synchronizes its CRT with the target CRT. First, it uses the EMR to synchronize its electron gun with the electron gun in the target CRT. Then, when the TEMPEST ELINT unit detects EMR indicating that the target CRT fired on a pixel, the TEMPEST ELINT unit fires the electron gun of its CRT. The ELINT CRT is in perfect synchronism with the target CRT; when the target lights a pixel, a corresponding pixel on the TEMPEST ELINT CRT is lit. The exact picture on the target CRT will appear on the TEMPEST ELINT CRT. Any changes on the target screen will be instantly reflected in the TEMPEST ELINT screen. TEMPEST Certified equipment gives off emissions levels that are too faint to be readily detected. Certification levels are set out in National Communications Security Information Memorandum 5100A (NACSIM 5100A). "[E]mission levels are expressed in the time and frequency domain, broadband or narrow band in terms of the frequency domain, and in terms of conducted or radiated emissions." White, supra, note 9, 10.1. For a thorough though purposely misleading discussion of TEMPEST ELINT see Van Eck, Electromagnetic Radiation from Video Display units: An Eavesdropping Risk?, 4 Computers & Security 269 (1985).
15. Pub. L. No. 90-351, 82 Stat. 197. The Act criminalizes trespassatory ELINT by individuals as well as governmental agents. cf. Katz v. United States, 389 U.S. 347 (1967) (Fourth Amendment prohibits surveillance by government not individuals.)
16. 18 U.S.C. 2511(1)(a).
17. United States v. Hall, 488 F.2d 193 (9th Cir. 1973) (found no legislative history indicating Congress intended the act to include radio-telephone conversations). Further, Title III only criminalized the interception of "aural" communications which excluded all forms of computer communications.
18. Willamette Subscription Television v. Cawood, 580 F.Supp 1164 (D. Or. 1984) (non-wire communications lacks any expectation of privacy).
19. Pub. L. No. 99-508, 100 Stat. 1848 (codified at 18 U.S.C. 2510-710) [hereinafter ECPA].
20. 18 U.S.C. 2511(1)(a) criminalizes the interception of "any wire, oral or electronic communication" without regard to an expectation of privacy.
21. Interception of Communications Act 1985, Long Title, An Act to make new provision for and in connection with the interception of communications sent by post or by means of public telecommunications systems and to amend section 45 of the Telecommunications Act 1984.
22. Interception of Communications Act 1985 1, Prohibition on Interception: (1) Subject to the following provisions of this section, a person who intentionally intercepts a communication in the course of its transmission by post or by means of a public telecommunications system shall be guilty of an offence and liable-- (a) on summary conviction, to a fine not exceeding the statutory maximum; (b) on conviction on indictment, to imprisonment for a term not exceeding two years or to a fine or to both.
*** 23. Tapping (aka trespassatory eavesdropping) is patently in violation of the statute. "The offense created by section 1 of the Interception of Communications Act 1985 covers those forms of eavesdropping on computer communications which involve "tapping" the wires along which messages are being passed. One problem which may arise, however, is the question of whether the communication in question was intercepted in the course of its transmission by means of a public telecommunications system. It is technically possible to intercept a communication at several stages in its transmission, and it may be a question of fact to decide the stage at which it enters the "public" realm. THE LAW COMMISSION,WORKING PAPER NO. 110: COMPUTER MISUSE, 3.30 (1988).
24. "There are also forms of eavesdropping which the Act does not cover. For example. eavesdropping on a V.D.U. [referred to in this text as a CRT] screen by monitoring the radiation field which surrounds it in order to display whatever appears on the legitimate user's screen on the eavesdropper's screen. This activity would not seem to constitute any criminal offence..." THE LAW COMMISSION, WORKING PAPER NO. 110: COMPUTER MISUSE, 3.31 (1988).
25. 301.2(1) of the Canadian criminal code states that anyone who: ... without color of right, (a) obtains, directly or indirectly, any computer service, (b) by means of an electromagnetic ... or other device, intercepts or causes to be intercepted, either directly or indirectly, any function of a computer system ... [is guilty of an indictable offence].
26. UNITED STATES SENTENCING COMM'N, FEDERAL SENTENCING GUIDELINES MANUAL (1988) (Principles Governing the Redrafting of the Preliminary Guidelines "g." (at an unknown page))
27. There has been great debate over what exactly is a computer crime. There are several schools of thought. The more articulate school, and the one to which the author adheres holds that the category computer crime should be limited to crimes directed against computers; for example, a terrorist destroying a computer with explosives would fall into this category. Crimes such as putting ghost employees on a payroll computer and collecting their pay are merely age-old accounting frauds; today the fraud involves a computer because the records are kept on a computer. The computer is merely ancillary to the crime. This has been mislabeled computer crime and should merely be referred to as a fraud perpetrated with the aid of a computer. Finally, there are information crimes. These are crimes related to the purloining or alteration of information. These crimes are more common and more profitable due to the computer's ability to hold and access great amounts of information. TEMPEST ELINT can best be categorized as a information crime.
28. Compare, for example, the Watergate breakin in which the burglars were discovered when they returned to move a poorly placed spread spectrum bug.
29. TEMPEST Certified refers to the equipment having passed a testing and emanations regime specified in NACSIM 5100A. This classified document sets forth the emanations levels that the NSA believes digital equipment can give off without compromising the information it is processing. NACSIM 5100A is classified, as are all details of TEMPEST. To obtain access to it, contractor must prove that there is demand within the government for the specific type of equipment that intend to certify. Since the standard is classified, the contractors can not sell the equipment to non-secure governmental agencies or the public. This prevents reverse engineering of the standard for its physical embodiment, the Certified equipment. By preventing the private sector from owning this anti- eavesdropping equipment, the NSA has effectively prevented the them from protecting the information in their computers.
30. Previously the Bureau of Standards. The NIST is a division of the Commerce Department.
31. In this case computer equipment would include all peripheral computer equipment. There is no use is using a TEMPEST Certified computer if the printer or the modem are not Certified.
32. The NSA has tried to limit the availability of TEMPEST information to prevent the spread of the devices. For a discussion of the First Amendment and prior restraint See, e.g. The United States of America v. Progressive, Inc. 467 F.Supp 990 (1979, WD Wis.)(magazine intended to publish plans for nuclear weapon; prior restraint injunction issued), reh. den. United States v. Progressive Inc. 486 F.Supp 5 (1979, WD Wis.), motion den Morland v. Sprecher 443 US 709 (1979)(mandamus), motion denied United States v. Progressive, Inc. 5 Media L R (1979, 7th Cir.), dismd. without op. U.S. v. Progressive, Inc 610 F.2d 819 (1979, 7th Cir.); New York Times, Co. v. United States, 403 U.S. 713 (1971)(per curium)(Pentagon Papers case: setting forth prior restraint standard which government was unable to meet); T. EMERSON, THE SYSTEM OF FREEDOM OF EXPRESSION (1970); Balance Between Scientific Freedom and NAtional Security, 23 JURIMETRICS J. 1 (1982)(current laws and regulations limiting scientific and technical expression exceed the legitimate needs of national security); Hon. M. Feldman, Why the First Amendment is not Incompatible with National Security, HERITAGE FOUNDATION REPORTS (Jan. 14, 1987). Compare Bork, Neutral Principles and Some First Amendment Problems, 47 IND. L. J. 1 (First Amendment applies only to political speech); G. Lewy, Can Democracy Keep Secrets, 26 POLICY REVIEW 17 (1983)(endorsing draconian secrecy laws mirroring the English system).
33. For example, the NSA has just recently allowed the Drug Enforcement Agency (DEA) to purchase TEMPEST Certified computer equipment. The DEA wanted secure computer equipment because wealthy drug lords had were using TEMPEST eavesdropping equipment.
34. An Act to regulate the use of automatically processed information relating to individuals and the provision of services in respect of such information. -Data Protection Act 1984, Long Title.
35. "Personal data" means data consisting of information which relates to a living individual who can be identified from that information (or from that and other information in the possession of the data user), including any expression of opinion about the individual but not any indication of the intentions of the data user in respect of that individual. -Data Protection Act 1984 1(3)
36. "Data user" means a person who holds data, and a persons "Holds" data if -- (a) the data form part of a collection of data processed or intended to be processed by or on behalf of that person as mentioned in subsection (2) above; [subsection (2) defines "data"] and (b) that person (either alone or jointly or in common with other persons) controls the contents and use of the data comprised in the collection; and (c) the data are in the form in which they have been or are intended to be processed as mentioned in paragraph (a) above or (though not for the time being in that form) in a form into which they have been converted after being so processed and with a view to being further so processed on a subsequent occasion. - Data Protection Act 1(5).
37. Data Protection Act 1984, 4,5.
38. An individual who is the subject of personal data held by a data user... and who suffers damage by reason of (1)(c) ... the disclosure of the data, or access having been obtained to the data without such authority as aforesaid shall be entitled to compensation from the data user... for any distress which the individual has suffered by reason of the ... disclosure or access. - Data Protection Act 1984 23.
39. ... it shall be a defense to prove that ... the data user ... had taken such care as in all the circumstances was reasonably required to prevent the... disclosure or access in question. Data Protection Act 1984 23(3)
Copyright (c) 1993 by Grady Ward. All Rights Reserved. Permission is granted for free electronic distribution. ought to be filtered, it is especially important for more-on-TEMPESThttp://www.usc.edu/~rengen/PROCESS/Public/Text/Pseudo_Intell/Tempset_Document
From:firstname.lastname@example.org (Christopher J. Seline (CJS@CWRU.CWRU.EDU)) The following is a prepublication draft of an article on TEMPEST. I am posting it to this news group in the hope that it will: (1) stimulate discussion of this issue; (2) expose any technical errors in the document; (3) solicit new sources of information; (4) uncover anything I have forgotten to cover. I will be unable to monitor the discussions of the article. Therefore, PLEASE post your comments to the news group BUT SEND ME A COPY AT THE ADDRESS LISTED BELOW. I have gotten a number of mail messages about the format of this article. Some explanation is in order: The numbered paragraphs following "____________________" on each page are footnotes. I suggest printing out the document rather than reading it on your CRT. Thanks you in advance. Christopher Seline email@example.com firstname.lastname@example.org (c) 1990 Christopher J. Seline =============================================================================
Mind control programming
And see this for some of the technical background for electronic programming of people